Steel wall pool set Nuovo Ø 450 x 120 cm

Important notes: Please note that this pool type requires the construction of a coving, this can be done with polystyrene wedges (Art. No. 016041 page 23) or with sand. Please refer to the instructions for a detailed description of the fillet. This pool type is suitable for installation on a paved surface. It must be stable enough to withstand the weight of a filled pool regardless of the weather. In addition, the possibility must be created that leaking pool water can drain off without causing any damage. The installation in the ground (only with pressure protection) is possible partially or completely. Please note that for underground installation the pool wall must be statically protected against earth pressure. It is easiest to install the pool with at least three people. The approximate installation time is from 3 hours, depending on the equipment variant and size (without preparatory work for substructure or filling). The effective water depth is -10 cm from the steel casing height. Watertightness / class: W0. EN 16582-1 / EN 16582-3. Due to the complexity of the product, please download the operating instructions. ATTENTION! Steel wall pools are not suitable for salt water (danger of rusting!). All important questions such as installation requirements or building law requirements will be answered by your local specialist.