Steinbach Steinbach

Styria pool oval 800 x 400 x 120 cm

012360
Art.
  • Robust, galvanised coated steel casing (approx 0.60 mm up to 1.20 m depth, 0.80 mm at 1.50 m depth)
  • Hand rail and floor rails out of plastic
  • Winterproof liner in adria blue: approx. 0.60 mm and liner colour in sand: approx. 0.80 mm
  • Interlocking steel wall connection
  • Skimmer and nozzle perforation

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

Out of stock
This product is available in home improvement stores and online shops.
From € 49,- free shipping
Return free of charge

Product information

The steel wall pools of the "Styria" series are the most robust and strongest pools in this class. Not only the strong steel wall (approx. 0.80 mm at a depth of 150 cm), but also the winter-proof inner liner (liner colour adria blue: approx. 0.60 mm and liner colour sand: approx. 0.80 mm) allow year-round use. Disassembly in winter is not necessary. Punched holes for skimmer and inlet nozzle are already available. The "Styria" series in oval is only suitable for underground installation. A foundation plate and retaining walls on the long sides are required.
The *Skimmer set S1 is the optimal preparation for the circulation of your pool water. For the "Styria" series in oval with the pool size of 490 x 300 x 120 cm we recommend the *Steinbach filter unit Classic 250N or the *Steinbach filter unit Active Balls+.  For all steel wall pools of the "Styria" Series in oval with a pool height of 150 cm and the pool size 800 x 400 x 120 we recommend the *Steinbach filter unit Compact 8. The *Steinbach filter unit Classic 400 is recommended for the pool sizes 625 x 360 x 120 and 737 x 360 x 120. These Steinbach filter units are perfectly matched to the "Styria" series in oval and ensure crystal-clear pool water.
(* not included in delivery)

Pool 800 x 400 x 120 cm
Water capacity: 30.900 l (Filling height 110 cm)
Robust, galvanised coated steel casing (approx 0.60 mm up to 1.20 m depth, 0.80 mm at 1.50 m depth)
Interlocking steel wall connection
Hand rail and floor rails out of plastic
Skimmer and nozzle perforation
Winterproof liner in adria blue: approx. 0.60 mm and liner colour in sand: approx. 0.80 mm

Oval pool sets are only suitable for building into the ground. A foundation base and supporting walls on the long sides are required!

Accessories
Other customers also purchased

Important information

Important information: This pool type is suitable for mounting on a paved surface. It must be stable enough to support the weight of the filled pool irrespective of the weather. It must also be ensured that excess pool water can drain easily to avoid causing damage. It can be completely or partially built into the ground (only with pressure protection). Note that the pool wall must be protected against static earth pressure if installed underground. It is easiest to assemble with at least three people. The approximate assembly time totals 3 or more hours, depending on the model type and size (without preparation work on substructure or filling). The effective water depth is -10 cm from the steel wall height. Watertightness/Class: W0. EN 16582-1 / EN 16582-3. Due to the complexity of the product, please download the instruction manual. Your local specialist can answer all your questions regarding installation requirements or building code regulations.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.