Steinbach Steinbach

Steel wall pool set Highline oval 640 x 366 x 132 cm

012623
Art.
  • Massive and space-saving support structure
  • Robust, galvanised and plastic-coated steel casing (approx. 0.40 mm)
  • Winter-proof inner liner (approx. 0.40 mm)
  • Integrated skimmer and pool inlet nozzle
  • It can be completely or partially built into the ground. Please comply with the installation instructions

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

Accessories
Other customers also purchased

Out of stock
This product is available in home improvement stores and online shops.
From € 49,- free shipping
Return free of charge

Product information

Even more solid and space-saving when assembled. The Highline series is for pool owners who not only like to dive down deep but also want loads of space The water depth of approx. 120 cm is unbeatable. Then there is the solid construction of the Nuovo de Luxe series with its extra wide handrail and strong retaining structure. This lateral supporting construction is only 25 cm instead of the 90 cm of the Nuovo de Luxe series but still boasts better stability. This saves you 130 cm in width. A strong steel wall (approx. 0.40 mm) and the winter-proof inner liner (approx. 0.40 mm) allow the use all year round. No more will you have to disassemble your pool for the winter months. No more will you have to disassemble your pool for the winter months. The set includes inlet nozzles, skimmer set, swimming pool connection hoses and hose clamps to ensure optimal circulation. It is also supplied with an access ladder. We advise using the Comfort filter unit to ensure optimal circulation and crystal clear water.

Pool 640 x 366 x 132 cm
Water capacity: 22.300 l (Filling height 122 cm)
Robust, galvanised and plastic-coated steel casing (approx. )
15 cm wide metal handrail
Metal supports
Plastic/metal floor rails
Solid metal side strut constructions
Winter-proof inner liner (approx. )
Skimmer and nozzle perforation
Integrated skimmer and pool inlet nozzle
Connecting hoses and hose clamps
Filter unit Comfort 75, Circulation capacity 7.800 l/h
Standard ladder (unsecured access equipment)
Teflon thread seal tape

 

It can be completely or partially built into the ground.

Please be aware that the shown product contain only the current scope of delivery, based on 2024.

02 Top plate
€4.49
including VAT, plus shipping costs
Free shipping
03 Middle support/column
€105.00
including VAT
Free shipping
04 Long U-profile
€105.00
including VAT
06 Rail connection
€4.99
including VAT, plus shipping costs
07 Carrier/tensor
Free shipping
12 Reinforcement plate, right
€81.90
including VAT
14 3-hole reinforcement
€4.49
including VAT, plus shipping costs
€19.90
including VAT, plus shipping costs
€19.90
including VAT, plus shipping costs
€2.49
including VAT, plus shipping costs
€21.90
including VAT, plus shipping costs
Free shipping
€389.00
including VAT
Free shipping
€169.00
including VAT
€3.99
including VAT, plus shipping costs
Free shipping
€51.90
including VAT

Important information

Important notes: Please note that this pool type requires the construction of a coving, this can be done with polystyrene wedges (Art. No. 016041 page 23) or with sand. Please refer to the instructions for a detailed description of the fillet. This pool type is suitable for installation on a paved surface. It must be stable enough to withstand the weight of a filled pool regardless of the weather. In addition, the possibility must be created that leaking pool water can drain off without causing any damage. The installation in the ground (only with pressure protection) is possible partially or completely. Please note that for underground installation the pool wall must be statically protected against earth pressure. It is easiest to install the pool with at least three people. The approximate installation time is from 3 hours, depending on the equipment variant and size (without preparatory work for substructure or filling). The effective water depth is -10 cm from the steel casing height. Watertightness / class: W0. EN 16582-1 / EN 16582-3. Due to the complexity of the product, please download the operating instructions. ATTENTION! Steel wall pools are not suitable for salt water! All important questions, such as installation requirements or legal building requirements, will be answered by your local specialist.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.