Steinbach
Solar collector Loop
- Compact design
- Greatest efficiency due to ingenious hemispherical design
- Increased heating performance through several connected elements
- Can be used with all kinds of above ground pools
- The solar collector is suitable for salt water
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Heat your above ground pool with solar power? 1, 2 or 3 °C water temperature? Solar collector Loop makes this possible - no problem. For optimum regulation of the water temperature, we recommend our Bypass Set (Art. No. 060045). With the help of the Bypass Set, the water flow rate can be reduced, thus increasing the dwell time of the water in the solar collector, which leads to faster heating of your pool water. The maximum water throughput of the Solar Collector Loop is 7.5 m³/h. We recommend keeping the water flow rate as low as possible within the specified technical data, this will ensure the most efficient use of your solar collector. The Solar Collector Loop is also suitable for salt water pools. For increased heating performance, several elements can be connected in series.
58 x 58 x 33 cm (L x W x H)
Connection Ø 32/38 mm
Flow rate max. 7.5 m³/h
Water content collector 5 l
Collector hose 24 x 38 mm
Preparation for INTEX special adapter
The solar collector is suitable for salt water
*Supplied without connecting hoses or mounting material
Bypass set is recommended (optional 060045)
*Recommended accessories:
*Swimming pool hose 100 cm (Art.no. 049915)
*Swimming pool hose 37 cm (Art.no. 049916)
*Hose clamps (Art.No. 040946)
**Reduction 38/32 mm (Art.No. 049917)
*Bypass Set (Art.No. 060045)
**If the collector is integrated into a water circuit with 32 mm hoses
