Steinbach
Swimming pool cleaner Tiger Shark®
061000
Art.
- Integrated cleaning system
- High performance system - 16,980 l/h
- Fully automatic cleaning mode
- For floors and walls
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
From € 49,- free shipping
Return free of charge
Product information
Fully automatic floor vacuum for floors and walls. For pool sizes up to approx. 6 x 12 m. The integrated filter system with 16,980 l/h performance ensures optimal pool cleaning, regardless of the filter unit. The 2 pleat filter cartridges are easy to remove and re-usable. the floating cable which connects the control unit and the floor vacuum is 16.76 m long.
CAUTION! Not suitable for overflow pools.
1
![POWER SUPPLY]()
2
![FLOATING POWER CABLE, DRIVE]()
4
![Screw M4x12 Torx]()
7
![TIGERSHARK SIDE COVER]()
8
![HANDLE-ARM SLIDE]()
9
![ROLLER BEARING GUIDE]()
10
![COVER CLIP]()
11
![TIGERSHARK OUTER CASING ASSEMBLY]()
12
![Screw M5x20 Torx]()
14
![VENTURI]()
15
![HANDLE ASSEMBLY]()
16
![INSERT RETAINER PLATES 1]()
17
![INSERT RETAINER PLATES]()
18
![COMPLETE VENTURI ASSEMBLY NEW]()
19
![Screw M4x12 Torx, flat]()
20
![MOTOR UNIT, 4H DIRECT CURRENT]()
21
![TURBINE]()
22
![FILTER CARTRIDGE CARRIER]()
23
![FILTER CARTRIDGE (DOUBLE PACK)]()
24
![BOTTOM LID ASSEMBLY]()
25
![Foam roller]()
26
![Chain]()
27
![PULLEY BEARING IDLER]()
28
![DRIVE BEARING PULLEY ASSEMBLY]()
29
![HANDLE LATCH SPRING]()
30
![LATCH HANDLE]()
31
![Screw M2.9x8 Torx]()
32
![PLATE COVER, STRAIN RELIEF]()
33
![ASSEMBLY DRIVE PIN]()
35
![TOP CABLE RING]()
37
![TOP CABLE RING]()
39
![SCREW]()
40
![CENTRAL PIN, REAR WHEEL]()
41
![PLASTIC RING]()
42
![ROLLER BRUSH]()
43
![INLET COVER]()
44
![INLET FLAP]()
45
![Screw M2.9x12 Torx]()
46
![SPRING RETAINER, BOTTOM LID]()
47
![BOTTOM LID SPRING]()
48
![CLIP FOLLOWER]()
49
![CLIP SUPPORT]()
50
![PLATE LOCKING]()
51
![Screw M2.9x13 Torx]()
52
![BOTTOM LID]()
53
![BOTTOM LID FILTER GASKET]()
22/23
![FILTER CARTRIDGE ASSEMBLY]()
