Pool Professional
Superflock liquid
- To bundle suspended particles (cause of turbidity) in the water
- Improves the effectiveness of the sand filter
- For crystal clear water
- Not suitable for cartridge filters!
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Superflock liquid, 1,00 l ,
Liquid turbidity remover for sand filters
USAGE: Water care product. Superflock liquid ensures that even the finest suspended particles are bundled to larger clumps. The filter can catch these flakes in the sand and, in the course of the next backwashing, remove them from the system. This product is NOT suitable for cartridge filters.
For private swimming pools only.
DOSAGE: The pH-value of the water has to be between 7.0 and 7.4 to get the best results. The flocculation acts optimally only during the filtration process directly in the feed line, therefore flocculants should never be given directly into the pool. Add at least 0.15 ml per m³ of circulated swimming pool water by use of a dosage pump. The amount of the addition depends on the number of visitors and the circulation time. To sharpen the sand filter, pour 100 - 200 ml Superflock liquid per 10 m³ of swimming pool water slowly into the skimmer while the circulation pump is running. Then shutdown the circulating pump immediately for ca. 15 min., so that flakes can form. Afterwards filter as long as the turbidity is eliminated. If turbidity is still not fully eliminated, backwash filter and repeat the addition.